Synthesis and toxicity assessment of Fe3O4 NPs grafted by ∼ NH2-Schiff base as anticancer drug: modeling and proposed molecular mechanism through docking and molecular dynamic simulation.

Superparamagnetic iron oxide nanoparticles have been synthesized using chain length of (3-aminopropyl) triethoxysilane for cancer therapy. First, we have developed a layer by layer functionalized with grafting 2,4-toluene diisocyanate as a bi-functional covalent linker onto a nano-Fe3O4 support. Then, they were characterized by Fourier transform infrared, X-ray powder diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and VSM techniques. Finally, all nanoparticles with positive or negative surface charges were tested against K562 (myelogenous leukemia cancer) cell lines to demonstrate their therapeutic efficacy by MTT assay test. We found that the higher toxicity of Fe3O4@SiO2@APTS ∼ Schiff base-Cu(II) (IC50: 1000 µg/mL) is due to their stronger in situ degradation, with larger intracellular release of iron ions, as compared to surface passivated NPs. For first time, the molecular dynamic simulations of all compounds were carried out afterwards optimizing using MM+, Semi-empirical (AM1) and Ab-initio (STO-3G), Forcite Gemo Opt, Forcite Dynamics, Forcite Energy and CASTEP in Materials studio 2017. The energy (eV), space group, lattice parameters (Å), unit cell parameters (Å), and electron density of the predicted structures were taken from the CASTEP module of Materials Studio. The docking methods were used to predict the DNA binding affinity, ribonucleotide reductase, and topoisomerase II.

Molecular Characterization and Experimental Utility of Monoclonal Antibodies with Specificity for Aliphatic Di- and Polyisocyanates.

Aliphatic di- and polyisocyanates are crucial chemical ingredients in many industrial processes and are a well-recognized cause of occupational asthma. Serologic detection of "chemical epitopes" in biological samples could serve as an exposure surveillance approach toward disease prevention, and thus we sought to generate aliphatic isocyanate-specific monoclonal antibodies (mAbs). Three hybridomas were generated from Balb/c mice immunized with a commercial product containing a combination of uretdione, homopolymer, and monomeric forms of hexamethylene diisocyanate (HDI). Three stable hybridomas were subcloned by limiting dilution, two secreting IgG1κ and one secreting IgMκ mAb that bind aliphatic di- and polyisocyanates (conjugated to albumin), but not aromatic toluene or methylene diphenyl diisocyanate (TDI or MDI). Each mAb demonstrates slight differences in epitope specificity, for example, recognition of hydrogenated MDI (HMDI) or different carrier proteins (transferrin, actin) reacted with vapor phase HDI, and is encoded by unique recombination of different germline antibody genes, with distinct complementary determining regions. By western blot, all three mAbs detect a molecule with characteristics of an albumin adduct uniquely in urine from mice skin exposed to a mixture of aliphatic di- and polyisocyanate. Together, the data define molecular determinants of humoral immune recognition of aliphatic di- and polyisocyanates through new mAbs, which will serve as useful research reagents and may be applicable to future exposure surveillance efforts.

Development of a method for quantification of toluene diisocyanate and methylenediphenyl diisocyanate migration from polyurethane foam sample surface to artificial sweat by HPLC-UV-MS.

The US Environmental protection agency (EPA) has published guidance that includes test procedures for evaluating indoor exposure to chemicals from products. One of the test procedures represents the migration test for evaluating potential dermal exposure from home furniture. Such an evaluation involves the chemical measurement of the sweat which is currently unavailable in the literature. The objective of this project was to develop and validate an analytical method for quantification of migration of 4,4'-methylenediphenyl diisocyanate (MDI), 2,6-toluene diisocyanate (2,6-TDI) and 2,4-toluene diisocyanate (2,4-TDI) from a polyurethane (PU) flexible foam to artificial sweat that meets the recommendations of the EPA test protocol. Following the EPA protocol, six synthetic sweat solutions were prepared and used in evaluation of isocyanate recovery performance. The migration tests were conducted using five foam types that were chosen and supplied by PU foam manufacturers to represent the types most commonly found in commercial products, and with formulations anticipated to have the highest potential residual TDI or MDI. Migration tests were conducted using glass fiber filters (GFF) coated with 1-(2-methoxyphenyl)piperazine (1,2-MP) and analyzed using HPLC equipped with a UV detector for quantification and a MS detector to qualify peaks. The detection limits of the method were 0.002 µg/mL for 2,6-TDI, 0.011 µg/mL for 2,4-TDI, and 0.003 µg/mL for MDI. Quantification limits were 0.006 µg/mL, 0.037 µg/mL, and 0.010 µg/mL, respectively. The recovery tests on a Teflon surface for 5 of the 6 EPA-recommended synthetic sweat solutions indicate the recovery percentage was approximately 80% for diisocyanates. Recovery for the sixth sweat solution was low, approximately 30%. TDI and MDI migration was not observed when testing was conducted on foam samples.

Concentration × time analyses of sensory irritants revisited: Weight of evidence or the toxic load approach. That is the question.

The toxic effects resulting from inhalation exposure depend on both the concentration (C) of the inhaled substance and the exposure duration (t), including the assumptions that the exposure-limiting toxic effect is linearly linked with the accumulated C × t (inhaled dose), and detoxification or compensatory responses diminishing this dose are negligible. This interrelationship applies for both constant and fluctuating concentrations and is usually expressed by the toxic load equation Cn × t = constant effect (k). The toxic load exponent 'n' is derived from both C- and t-dependent exponents with Cb2×tb3 = k with n = b2/b3. This model is taken as a fundamental basis for assessing the acute hazard posed by atmospheric releases of noxious substances, whether deliberate or accidental. Despite its universal use, especially for inhaled irritants, the toxicological significance of this mathematical construct is still discussed controversially. With n = 1 this equation is called Haber's rule. The underlying assumption is that the exposure-based calculated and the actually inhaled Cb2×tb3 are identical. Unlike the calculated dose, the latter is dependent on the test species and its t-dependent change in respiratory minute volume (MV). The retention patterns of inhaled irritant vapors may differ in obligate nasal breathing rodents and oronasally breathing humans as well. Thus, due to the interdependence of n on both C, t and k, this mathematical construct generates a bioassay-specific 'n' which can hardly be considered as human-equivalent, especially following exposure to sensory irritants known to elicit reflex-related changes in MV. The C- and t-dependent impact on Cn × t = k was analyzed with the sensory irritant n-butyl monoisocyanate and compared with t-dependent changes elicited by highly, moderately, and poorly water-soluble sensory irritants ammonia, toluene diisocyanate, and phosgene, respectively. This comparison reveals that n depends on several factors: In cases where MV is instantly and plateau-like depressed with onset of exposure, n appears to be most dependent on Cb2 × MV whereas for a similar slower time-dependent response n becomes more dependent on MV × tb3. For any ensuing risk characterization that focuses on acute non-lethal threshold Cb2 × tb3's, the sensory irritation-related depression in MV must be known to arrive at meaningful conclusions. In summary, both Cn- and t-dependent dosimetry-related pitfalls may occur in acute bioassays on rodents following inhalation exposure to irritants. These must be identified and dealt with judiciously prior to translation to apparently similar human exposures. By default, extrapolations from one duration to another should start with that Cn × t eliciting the least depression in MV with n = 1.

A Review of the Surface Modification of Cellulose and Nanocellulose Using Aliphatic and Aromatic Mono- and Di-Isocyanates.

Nanocellulose has been subjected to a wide range of chemical modifications towards increasing its potential in certain fields of interest. These modifications either modulated the chemistry of the nanocellulose itself or introduced certain functional groups onto its surface, which varied from simple molecules to polymers. Among many, aliphatic and aromatic mono- and di-isocyanates are a group of chemicals that have been used for a century to modify cellulose. Despite only being used recently with nanocellulose, they have shown great potential as surface modifiers and chemical linkers to graft certain functional chemicals and polymers onto the nanocellulose surface. This review discusses the modification of cellulose and nanocellulose using isocyanates including phenyl isocyanate (PI), octadecyl isocyanate (OI), toluene diisocyanate (TDI), diphenylmethane diisocyanate (MDI), hexamethylene diisocyanate (HMDI), and their derivatives and polymers. It also presents the most commonly used nanocellulose modification strategies including their advantages and disadvantages. It finally discusses the challenges of using isocyanates, in general, for nanocellulose modification.

Toluene diisocyanate based phase-selective supramolecular oil gelator for effective removal of oil spills from polluted water.

Due to tremendous resource wastes and great harm to ecological environment caused by the accidental oil spills, an alkyl bicarbamate supramolecular oil gelator was synthesized and applied to selectively gelate oils from oil/water mixtures. Interestingly, the oil gelator could be self-assembled in a series of organic solvents, i.e., edible oils and fuel oils to form 3D networks and then turned into thermally reversible organogels, allowing easy separation and removal of oil spills from oil/water mixtures. The possible self-assembly mode for the formation of organogels was proposed. What's more, the optimal conditions for using the oil gelator to recover oils were experimentally determined. Inspiringly, taking gasoline as the co-congealed solvent, a complete gelation of oil phase was achieved within 15 min with high oil removal rate and oil retention rate after convenient salvage and cleanup of oil gels from oil/water mixtures. The oil gelator had some advantages in solidifying oil spills on water surface, exhibiting fast oil gelation, convenient and thorough oil removal and easy recovery. This work illustrates the significant role of oil gelators in the potential cleanup of spilled oils for water purification.

Neuro-immune interactions in chemical-induced airway hyperreactivity.

Asthma may be induced by chemical sensitisers, via mechanisms that are still poorly understood. This type of asthma is characterised by airway hyperreactivity (AHR) and little airway inflammation. Since potent chemical sensitisers, such as toluene-2,4-diisocyanate (TDI), are also sensory irritants, it is suggested that chemical-induced asthma relies on neuro-immune mechanisms.We investigated the involvement of transient receptor potential channels (TRP) A1 and V1, major chemosensors in the airways, and mast cells, known for their ability to communicate with sensory nerves, in chemical-induced AHR.In vitro intracellular calcium imaging and patch-clamp recordings in TRPA1- and TRPV1-expressing Chinese hamster ovarian cells showed that TDI activates murine TRPA1, but not TRPV1. Using an in vivo model, in which an airway challenge with TDI induces AHR in TDI-sensitised C57Bl/6 mice, we demonstrated that AHR does not develop, despite successful sensitisation, in Trpa1 and Trpv1 knockout mice, and wild-type mice pretreated with a TRPA1 blocker or a substance P receptor antagonist. TDI-induced AHR was also abolished in mast cell deficient Kit(Wsh) (/Wsh) mice, and in wild-type mice pretreated with the mast cell stabiliser ketotifen, without changes in immunological parameters.These data demonstrate that TRPA1, TRPV1 and mast cells play an indispensable role in the development of TDI-elicited AHR.

Characterization and comparative analysis of 2,4-toluene diisocyanate and 1,6-hexamethylene diisocyanate haptenated human serum albumin and hemoglobin.

Diisocyanates (dNCOs) are low molecular weight chemical sensitizers that react with autologous proteins to produce neoantigens. dNCO-haptenated proteins have been used as immunogens for generation of dNCO-specific antibodies and as antigens to screen for dNCO-specific antibodies in exposed individuals. Detection of dNCO-specific antibodies in exposed individuals for diagnosis of dNCO asthma has been hampered by poor sensitivities of the assay methods in that specific IgE can only be detected in approximately 25% of the dNCO asthmatics. Apart from characterization of the conjugates used for these immunoassays, the choice of the carrier protein and the dNCO used are important parameters that can influence the detection of dNCO-specific antibodies. Human serum albumin (HSA) is the most common carrier protein used for detection of dNCO specific-IgE and -IgG but the immunogenicity and/or antigenicity of other proteins that may be modified by dNCO in vivo is not well documented. In the current study, 2,4-toluene diisocyanate (TDI) and 1,6-hexamethylene diisocyanate (HDI) were reacted with HSA and human hemoglobin (Hb) and the resultant adducts were characterized by (i) HPLC quantification of the diamine produced from acid hydrolysis of the adducts, (ii) 2,4,6-trinitrobenzene sulfonic acid (TNBS) assay to assess extent of cross-linking, (iii) electrophoretic migration in polyacrylamide gels to analyze intra- and inter-molecular cross-linking, and (iv) evaluation of antigenicity using a monoclonal antibody developed previously to TDI conjugated to Keyhole limpet hemocyanin (KLH). Concentration-dependent increases in the amount of dNCO bound to HDI and TDI, cross-linking, migration in gels, and antibody-binding were observed. TDI reactivity with both HSA and Hb was significantly higher than HDI. Hb-TDI antigenicity was approximately 30% that of HSA-TDI. In conclusion, this data suggests that both, the extent of haptenation as well as the degree of cross-linking differs between the two diisocyanate species studied, which may influence their relative immunogenicity and/or antigenicity.

2,4-Toluene diisocyanate detection in liquid and gas environments through electrochemical oxidation in an ionic liquid.

The electrochemical oxidation of 2,4-toluene diisocyanate (2,4-TDI) in an ionic liquid (IL) has been systematically characterized to determine plausible electrochemical and chemical reaction mechanisms and to define the optimal detection methods for such a highly significant analyte. It has been found that the use of an IL as the electrolyte allows the oxidation of 2,4-TDI to occur at a less positive anodic potential with no side reactions as compared to traditional acetonitrile based electrolytes. UV-Vis, FT-IR, cyclic voltammetry and Electrochemical Impedance Spectroscopy (EIS) studies have revealed the unique mechanisms of dimerization of 2,4-TDI at the electrode interface by self-addition reactions, which can be utilized to improve the selectivity of detection. The study of 2,4-TDI redox chemistry further facilitates the development of a robust amperometric sensing methodology by selecting a hydrophobic IL ([C4mpy][NTf2]) and by restricting the potential window to only include the oxidation process. Thus, this innovative electrochemical sensor is capable of avoiding the two most ubiquitous interferents in ambient conditions (i.e. humidity and oxygen), thereby enhancing the sensor performance and reliability for real world applications. The method was established to detect 2,4-TDI in both liquid and gas phases. The limits of detection (LOD) values were 130.2 ppm and 0.7862 ppm, respectively, for the two phases, and are comparable to the safety standards reported by NIOSH. The as-developed 2.4-TDI amperometric sensor exhibits a sensitivity of 1.939 µA ppm(-1). Moreover, due to the simplicity of design and the use of an IL both as a solvent and non-volatile electrolyte, the sensor has the potential to be miniaturized for smart sensing protocols in distributed sensor applications.

Interfacial thiol-isocyanate reactions for functional nanocarriers: a facile route towards tunable morphologies and hydrophilic payload encapsulation.

Functional nanocarriers were synthesized using an in situ inverse miniemulsion polymerization employing thiol-isocyanate reactions at the droplet interface to encapsulate hydrophilic payloads. The morphology of the nanocarriers is conveniently tunable by varying the reaction conditions and the dispersions are easily transferable to the aqueous phase.

Microwave-assisted synthesis of cyclodextrin polyurethanes.

Cyclodextrin (CD) has often been incorporated into polyurethanes in order to facilitate its use in encapsulation or removal of organic species for various applications. In this work a microwave-assisted method has been developed to produce polyurethanes consisting of α-, ß-, and γ-CD and three common diisocyanates. As compared to conventional heating, this new synthetic method saves energy, significantly reduces reaction time, and gets similar or improved yield. The reaction products have been fully characterized with (13)C, (1)H, and two-dimensional NMR spectroscopy. With suitable stoichiometry of starting CD and diisocyanate, the resulting CD polyurethane is organic-soluble and water-insoluble and is shown to remove Nile red dye and phenol from water. Possible applications include the removal of undesirable materials from process streams, toxic compounds from the environment, and encapsulation of color or fragrance molecules.

MALDI MS-based Composition Analysis of the Polymerization Reaction of Toluene Diisocyanate (TDI) and Ethylene Glycol (EG).

This study describes an MS-based analysis method for monitoring changes in polymer composition during the polyaddition polymerization reaction of toluene diisocyanate (TDI) and ethylene glycol (EG). The polymerization was monitored as a function of reaction time using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF MS). The resulting series of polymer adducts terminated with various end-functional groups were precisely identified and the relative compositions of those series were estimated. A new MALDI MS data interpretation method was developed, consisting of a peak-resolving algorithm for overlapping peaks in MALDI MS spectra, a retrosynthetic analysis for the generation of reduced unit mass peaks, and a Gaussian fit-based selection of the most prominent polymer series among the reconstructed unit mass peaks. This method of data interpretation avoids errors originating from side reactions due to the presence of trace water in the reaction mixture or MALDI analysis. Quantitative changes in the relative compositions of the resulting polymer products were monitored as a function of reaction time. These results demonstrate that the mass data interpretation method described herein can be a powerful tool for estimating quantitative changes in the compositions of polymer products arising during a polymerization reaction.

Characterization of urethane-dimethacrylate derivatives as alternative monomers for the restorative composite matrix.

OBJECTIVE: The aim was accomplished by a comparative analysis of the physicochemical properties of urethane-dimethacrylate (UDMA) monomers and their homopolymers with regard to the properties of basic dimethacrylates used presently in dentistry. The homologous series of UDMA were obtained from four oligoethylene glycols monomethacrylates (HEMA, DEGMMA, TEGMMA and TTEGMMA) and six diisocyanates (HMDI, TMDI, IPDI, CHMDI, TDI and MDI). METHODS: Photopolymerization was light-initiated with the camphorquinone/tertiary amine system. Monomers were tested for viscosity and density. Flexural strength, flexural modulus, hardness, water sorption and polymerization shrinkage of the polymers were studied. The glass transition temperature and the degree of conversion were also discussed. RESULTS: HEMA/IPDI appeared to be the most promising alternative monomer. The monomer exhibited a lower viscosity and achieved higher degree of conversion, the polymer had lower water sorption as well as higher modulus, glass temperature and hardness than Bis-GMA. The polymer of DEGMMA/CHMDI exhibited lower polymerization shrinkage, lower water sorption and higher hardness, however it exhibited lower modulus when compared to HEMA/TMDI. The remaining monomers obtained from HEMA were solids. Monomers with longer TEGMMA and TTEGMMA units polymerized to rubbery networks with high water sorption. The viscosity of all studied UDMA monomers was too high to be used as reactive diluents. SIGNIFICANCE: The systematic, comparative analysis of the homologous UDMA monomers and corresponding homopolymers along with their physico-mechanical properties are essential for optimizing the design process of new components desirable in dental formulations. Some of the studied UDMA monomers may be simple and effective alternative dimethacrylate comonomers.

Biosensors based on porous cellulose nanocrystal-poly(vinyl alcohol) scaffolds.

Cellulose nanocrystals (CNCs), which offer a high aspect ratio, large specific surface area, and large number of reactive surface groups, are well suited for the facile immobilization of high density biological probes. We here report functional high surface area scaffolds based on cellulose nanocrystals (CNCs) and poly(vinyl alcohol) (PVA) and demonstrate that this platform is useful for fluorescence-based sensing schemes. Porous CNC/PVA nanocomposite films with a thickness of 25-70 nm were deposited on glass substrates by dip-coating with an aqueous mixture of the CNCs and PVA, and the porous nanostructure was fixated by heat treatment. In a subsequent step, a portion of the scaffold's hydroxyl surface groups was reacted with 2-(acryloxy)ethyl (3-isocyanato-4-methylphenyl)carbamate to permit the immobilization of thiolated fluorescein-substituted lysine, which was used as a first sensing motif, via nucleophile-based thiol-ene Michael addition. The resulting sensor films exhibit a nearly instantaneous and pronounced change of their fluorescence emission intensity in response to changes in pH. The approach was further extended to the detection of protease activity by immobilizing a Förster-type resonance energy transfer chromophore pair via a labile peptide sequence to the scaffold. This sensing scheme is based on the degradation of the protein linker in the presence of appropriate enzymes, which separate the chromophores and causes a turn-on of the originally quenched fluorescence. Using a standard benchtop spectrometer to monitor the increase in fluorescence intensity, trypsin was detected at a concentration of 250 µg/mL, i.e., in a concentration that is typical for abnormal proteolytic activity in wound fluids.

Serum specific IgG response to toluene diisocyanate-tissue transglutaminase conjugate in toluene diisocyanate-induced occupational asthmatics.

BACKGROUND: Tissue transglutaminase (tTG) is a post-translational modifying enzyme located in airway epithelial cells. A potential contribution of serum specific IgG (sIgG) to tTG in airway inflammation of toluene diisocyanate (TDI)-induced occupational asthma (OA) has been suggested. OBJECTIVE: To prepare a TDI-tTG conjugate and detect serum specific antibodies in sera of patients with TDI-OA to understand this mechanism. METHODS: Ninety-nine patients with TDI-OA, 76 asymptomatic exposed controls, 208 patients with non-OA, and 74 unexposed controls were enrolled for this study. The TDI-tTG conjugate was prepared and confirmed by a native gel. Serum sIgG and/or sIgE antibodies to tTG, TDI-tTG, TDI conjugated to human serum albumin, cytokeratin 19, and serum cytokine levels, such as interleukin-8, transforming growth factor-ß1, and tissue inhibitor of metalloproteinase-1, were measured by enzyme-linked immunosorbent assay. The level of interleukin-8 produced from airway epithelial cells (A549) treated with tTG was evaluated to investigate the inflammatory effect of tTG and TDI-tTG. RESULTS: In the TDI-OA group, the prevalence of serum sIgG to TDI-tTG (17.2%) was higher than that of sIgG to tTG (11.1%), which were significantly higher than those of the 3 control groups (P < .05 for all groups). TDI-exposed subjects with high levels of serum sIgG to TDI-tTG had a high prevalence of sIgG to cytokeratin 19 and higher serum levels of transforming growth factor-ß1 and tissue inhibitor of metalloproteinase-1. The tTG and TDI-tTG dose-dependently increased interleukin-8 production from A549 cells. CONCLUSION: These findings suggest that TDI exposure in the workplace binds to tTG to form a conjugate that can induce serum sIgG antibody production, airway inflammation, and airway remodeling in patients with TDI-OA.

Biocompatibility and cytotoxicity of two novel low-shrinkage dental resin matrices.

BACKGROUND/PURPOSE: To reduce the polymerization shrinkage of dental composite resin, we used two different ratios of toluene 2,4-diisocyanate (TDI) or 1,6-hexamethylene diisocyanate (HDI) as functional side chains of bisphenol A-glycidyl methacrylate (bis-GMA) to synthesize two series of new dental resin matrices. This study evaluated the biocompatibility and cytotoxicity of these two series of new resin matrices. METHODS: Two series of new dental resin matrices with the ratios of TDI or HDI functional side chain to bis-GMA (defined as B group) being 1:4, 1:2, 1:1 and 3:2 (defined as T1/4, T1/2, T1, T3/2, and H1/4, H1/2, H1, H3/2 groups, respectively) were synthesized. Each resin sample was light cured and immersed in the culture medium for 24 hours to make the extract solution. Then, human gingival fibroblasts were cultured in different extract solutions for 72 hours. The cytotoxicities of different resins were evaluated by microtitertetrazolium (MTT) assay, the levels of cell-produced reactive oxygen species (ROS) induced by different extract solutions was measured. RESULTS: Resins of the T1/4 and B groups revealed significantly higher cytotoxicity than resins of other groups. However, resins of the T1 and T3/2 groups exhibited less cytotoxicity. In general, resins of the TDI-modified groups showed equal or less cytotoxicity and induced equal or lower levels of ROS than the corresponding resins of the HDI-modified and B groups. CONCLUSION: Our results showed that the TDI-modified resin matrices containing more functional side chains were less cytotoxic than the corresponding HDI-modified resin matrices. When the ratio of functional side chain to bis-GMA is increased, the stereo hindrance of resin structure is increased, more toxic resin monomers are trapped in the complicated resin structure, and thus the resin matrix reveals less cytotoxicity. The TDI-modified resin matrices exhibit higher stereo hindrance of resin structure and thus show less cytotoxicity than the corresponding HDI-modified resin matrices.

Development of sandwich ELISAs for the detection of aromatic diisocyanate adducts.

Diisocyanates (dNCOs) are highly reactive low molecular weight chemicals commonly used in the manufacturing industry. Occupational exposures to dNCOs have been shown to elicit allergic sensitization and occupational asthma. Among the most commonly used dNCOs in industry are the aromatic dNCOs, toluene diisocyanate (TDI) and methylene diphenyl diisocyanate (MDI). This study aimed to develop enzyme linked immunosorbent assays (ELISA) utilizing aromatic dNCO-specific monoclonal antibodies (mAbs) for the detection of aromatic dNCO adducts. Two sandwich ELISAs were developed. The first sandwich ELISA utilized mAb 60G2 along with an anti-human serum albumin (HSA) polyclonal antibody. This assay detected MDI-, 2,4- and 2,6-TDI-HSA adducts with limits of detection (LOD) of 2.67, <0.10, and 1.70 ng/mL, respectively. When spiked into human serum, the LOD of this ELISA increased to 34.37, 7.64 and 24.06 ng/mL, respectively. The second ELISA utilized mAbs 62G5 and 60G2 for capture and detection. This assay was capable of detecting 2,4- and 2,6-TDI-HSA adducts with LODs of <4.90 and 26.92 ng/mL, respectively, and when spiked in human serum, <4.90 and 95.93 ng/mL, respectively. This 62G5-60G2 sandwich assay was also able to detect dNCO adducted transferrin, hemoglobin, keratin and actin, but with less sensitivity than dNCO-HSA. The results of this study demonstrate potential application of these ELISAs in the identification and characterization of aromatic dNCO adducts as well as in biomonitoring occupational and environmental dNCO exposures.

Toluene diisocyanate emission to air and migration to a surface from a flexible polyurethane foam.

Flexible polyurethane foam (FPF) is produced from the reaction of toluene diisocyanate (TDI) and polyols. Because of the potential for respiratory sensitization following exposure to TDI, concerns have been raised about potential consumer exposure to TDI from residual 'free TDI' in FPF products. Limited and conflicting results exist in the literature concerning the presence of unreacted TDI remaining in FPF as determined by various solvent extraction and analysis techniques. Because residual TDI results are most often intended for application in assessment of potential human exposure to TDI from FPF products, testing techniques that more accurately simulated human contact with foam were designed. To represent inhalation exposure to TDI from polyurethane foam, a test that measured the emission of TDI to air was conducted. For simulation of human dermal exposure to TDI from polyurethane foam, a migration test technique was designed. Emission of TDI to air was determined for a representative FPF using three different emission test cells. Two were commercially available cells that employ air flow over the surface of the foam [the Field and Laboratory Emission Cell (FLEC®) and the Micro-Chamber/Thermal Extraction™ cell]. The third emission test cell was of a custom design and features air flow through the foam sample rather than over the foam surface. Emitted TDI in the air of the test cells was trapped using glass fiber filters coated with 1-(2-methoxyphenyl)-piperazine (MP), a commonly used derivatizing agent for diisocyanates. The filters were subsequently desorbed and analyzed by liquid chromatography/mass spectrometry. Measurement of TDI migration from representative foam was accomplished by placing glass fiber filters coated with MP on the outer surfaces of a foam disk and then compressing the filters against the disk using a clamping apparatus for periods of 8 and 24 h. The sample filters were subsequently desorbed and analyzed in the same manner as for the emission tests. Although the foam tested had detectable levels of solvent-extractable TDI (56ng TDI g(-1) foam for the foam used in emissions tests; 240-2800ng TDI g(-1) foam for the foam used in migration tests), no TDI was detected in any of the emission or migration tests. Method detection limits (MDLs) for the emissions tests ranged from 0.03 to 0.5ng TDI g(-1) foam (0.002-0.04ng TDI cm(-2) of foam surface), whereas those for the migration tests were 0.73ng TDI g(-1) foam (0.16ng TDI cm(-2) of foam surface). Of the three emission test methods used, the FLEC® had the lowest relative MDLs (by a factor of 3-10) by virtue of its high chamber loading factor. In addition, the FLEC® cell offers well-established conformity with emission testing standard methods.

Is diacetyl a respiratory sensitizer? A reconsideration using QSAR, QMM, and competition experiments.

Concerns have been raised that diacetyl (DA) might be a respiratory sensitizer based on its LUMO energy similar to that of the respiratory allergen toluene-2,4-diisocyanate (TDI) and results of a local lymph node assay (LLNA) that reported an EC3 of 1.9%. To better understand the concerns, we performed a systematic literature review and experimental competition reactions between DA and TDI. The experimental evidence demonstrates that DA is at least 400-fold less reactive than TDI. The literature review finds evidence that the EC3 for DA is actually >11%. We conclude that DA is unlikely to have significant respiratory sensitization potential.

Modeling formation and distribution of toluene-2,4-diamine (TDA) after spillage of toluene-2,4-diisocyanate (TDI) into a river.

Toluene diisocyanate (TDI) is a large volume chemical used for the production of polyurethanes. It is sparingly soluble in water, but hydrolyses instantaneously liberating toluene diamine (TDA), which is highly reactive to TDI. The ecotoxicity of TDI is dominated by TDA. The hydrolysis of TDI under static and dynamic conditions was investigated previously. Previously published data on TDI hydrolysis were re-visited, and based on these data a model was developed that allows a conservative and quick estimation of TDA concentrations in rivers following a major incident with TDI. As earlier published model experiments indicate, the maximum achievable TDA concentration is about 30 mg/L. Model simulations based on these experiments indicate that the TDA concentrations in a river after TDI discharge may be up to three orders of magnitude lower.